There is nothing better than seeing painted valve cover when you pop up the hood. This is from nissan primera p11 2.0. Sprayed with temperature resistant paint. First cleaned with degreser and scoth brite pad .
Posts Tagged ‘2.0’
Painted valve cover
Posted: 14th June 2018 by viljem_r in Cars,bikes, vehicles, Garage, StartTags: 2.0, cover, DIY, p11, paint, primera, spray, valve
0
BMW m47 egr blanking
Posted: 17th January 2018 by viljem_r in BMW X3 e83, Cars,bikes, vehicles, Garage, StartTags: 2.0, bmw, bmw x3, diesel, DIY, egr, m47, x3
I cleaned egr and intake manifold 2 times on my bmw. Because I need to replace my glow plugs and also solve some thermostat leak, I also decide to block egr valve. I bought blanking plate on ebay. I drilled 6,5mm hole in it, because I hoped I won’t need remapping again. I also […]
Quadcopter part 2
Posted: 15th May 2013 by viljem_r in Quadcopter, StartTags: 2.0, calibrate, es, esc, ibrate, kk2, multirotor, multirotot, quadcopter, r/c
In part one I showed how to make quadcopter. But in part 2 I will explain a few things, because I spent a lot of time to search information on the internet. I am beginner, but I learn fast. I wanna help you with what I learned. 1. KK board is very good for beginners. […]
Quadcopter part 1
Posted: 15th May 2013 by viljem_r in Quadcopter, StartTags: 2.0, kk, mulitorotor, quadcopter, r/c, technology
OK parts arrived. It is gonna be long afternoon 🙂 First I assembled the frame. Best is if you do not screw bottom board until you wire quadcopter. Otherwise you would had to dismantle it later. Then you mount motors on the frame. Some use nylon straps, but I screw them on frame. Next you […]