Posts Tagged ‘dji’

Seychelles drone footage

Posted: 17th October 2018 by viljem_r in Gopro, Quadcopter, Start
Tags: , , , , ,

Dji phantom 3 update failed

Posted: 9th December 2016 by viljem_r in Start
Tags: , , , , , ,

Here is what happend to my ph3 pro. Solution is to format sd card and copy firmware to card. Then power it and wait a lot, aprox 30 min.    

Here is my experience with Kopterworx. Kopterworx sells DJI products and repairs them. I had problems with my camera, so I sent them my drone for warranty repair. I sent them by mail packed in original package put in another box, with fragile and mail insurance. They repaired it and sent it to me. The […]

You can make your own gimbal protection in just 10 minutes. It is very usefull when you want to land somewhere on grass or  other terrain. It will protect your camera and gimbal. I used old laptop cover for guard, cut it with grinder and sand it with paper. I also drilled some holes to […]

Here is video about mod you will need if you are flying with dji naza. You will 3 positions on chanel 6 to select flight modes. Original potentiometer is not good, because it switches modes and it is really hard to select mode. Original has 10k potentiometer. So voltage is 3,3V between brown and orange wire. […]

Naza m-lite upgrade to naza v2

Posted: 9th February 2015 by viljem_r in Quadcopter, Start
Tags: , , , ,

You can buy naza m-lite with gps for 130 eur and upgrade it with this tool to 240 eur naza v2. Both nazas have same hardware, but different firmware.You can also downgrade it to original firmware, so there is no problem with warranty. Follow this instructions: http://naza-upgrade.com/ Tip: When you try to upgrade it make […]