After first H quad, which was not so good, I decided to build new one. Old fatso burned in flames J I get measures from flitetest. So my is almost same dimensions as one from flitetest. More inf: http://flitetest.com/articles/H_Quad_Scratch_Build It’s lighter and bigger. For landing gear I used plastic tube. It does job superblly. […]
Posts Tagged ‘quadcopter’
H-quad ver 2
Posted: 18th June 2013 by viljem_r in Quadcopter, StartTags: fpv, h frame, h-quad, multirotor, quadcopter
0
First flights compilation
Posted: 17th June 2013 by viljem_r in Quadcopter, StartTags: gopro, quadcopter
Found some time and edit few videos.
H-copter frame
Posted: 6th June 2013 by viljem_r in Quadcopter, StartTags: air, esc, fpv, frame, gopro, h-copter, hobby, hobbyking, motors, multirotor, quadcopter, r/c, wood
After some flight I decided to built my own frame. H copter should be more stable in the air. Also more convenient for FPV and Gopro. I built H frame from wood, bought in local store. You should always have in mind, that frame should be light. First you need to cut off wood. And […]
Pics from air
Posted: 31st May 2013 by viljem_r in Gopro, QuadcopterTags: air, hobby, ir, multirotor, nature, ovenia, pic, pics, picture, quadcopter, r/c, slovenia, village
Here are some first pics from my quadcopter.
Quadcopter first flight with gopro
Posted: 21st May 2013 by viljem_r in Gopro, Quadcopter, StartTags: air, aviation, camera, first flight, gopro, quadcopter, r/c, www youtube
Nothing special cause it is a first flight 🙂
Quadcopter mods
Posted: 21st May 2013 by viljem_r in Quadcopter, StartTags: crash, DIY, iy, leds, li po, mods, ods, qc, quadcopter, solder iron, volts
After crash 1 week ago, I decided to modify my QC. It was quite heavy crash. I broke frame and 2 propellers. Problem was that I didn’t see it well. I weld frame with solder iron. And it is as strong as it was before crash. I added 2 green blinking leds in […]
Quadcopter part 2
Posted: 15th May 2013 by viljem_r in Quadcopter, StartTags: 2.0, calibrate, es, esc, ibrate, kk2, multirotor, multirotot, quadcopter, r/c
In part one I showed how to make quadcopter. But in part 2 I will explain a few things, because I spent a lot of time to search information on the internet. I am beginner, but I learn fast. I wanna help you with what I learned. 1. KK board is very good for beginners. […]
Quadcopter part 1
Posted: 15th May 2013 by viljem_r in Quadcopter, StartTags: 2.0, kk, mulitorotor, quadcopter, r/c, technology
OK parts arrived. It is gonna be long afternoon 🙂 First I assembled the frame. Best is if you do not screw bottom board until you wire quadcopter. Otherwise you would had to dismantle it later. Then you mount motors on the frame. Some use nylon straps, but I screw them on frame. Next you […]
Quadcopter- parts
Posted: 13th May 2013 by viljem_r in Quadcopter, Start, Technical stuffTags: hobby, kk, multirotor, propellers, quadcopter, r/c
Some parts finnally arrived. Just waiting for a few small things and then we are ready to fly. 🙂 frame commands and receiver kk 2.0 board motors and propellers
Quadcopter – configuration
Posted: 7th May 2013 by viljem_r in Quadcopter, Start, Technical stuffTags: adcopter, fpv, kk 2.0, quadcopter, r/c
I always loved rc planes, boats… I build them in a past. But that was always very expensive hobby for kid. So I grew up and earned some money and decided to make my own quadcopter. Budget was about 200 eur. That means a little better than start models of quadcopters. Also if you build […]