Posts Tagged ‘r/c’
How to clean or disassemble brushless motor
Posted: 30th July 2015 by viljem_r in Quadcopter, Start, Technical stuffTags: 1100kv, brushless motor, quadcopter, r/c, turnigy
I found this funny plane on flitetest. Its simple and cheap. Cutting parts from foam: Then making power pod. Then body and wings: I used this parts: Turnigy Multistar 20 Amp Multi-rotor Brushless ESC 2-4S D2822/17 Brushless Outrunner 1100kv HobbyKing HK6DF 6 Channel 2.4ghz Channel Receiver […]
New rc project
Posted: 4th July 2013 by viljem_r in Quadcopter, StartTags: blog, hobbyking, new parts, obby, planes, r/c
Time to build something new… Some parts received, other on the way. If you like my blog you can donate for more cool projects 😉 Tnx
H-copter frame
Posted: 6th June 2013 by viljem_r in Quadcopter, StartTags: air, esc, fpv, frame, gopro, h-copter, hobby, hobbyking, motors, multirotor, quadcopter, r/c, wood
After some flight I decided to built my own frame. H copter should be more stable in the air. Also more convenient for FPV and Gopro. I built H frame from wood, bought in local store. You should always have in mind, that frame should be light. First you need to cut off wood. And […]
Pics from air
Posted: 31st May 2013 by viljem_r in Gopro, QuadcopterTags: air, hobby, ir, multirotor, nature, ovenia, pic, pics, picture, quadcopter, r/c, slovenia, village
Here are some first pics from my quadcopter.
Quadcopter first flight with gopro
Posted: 21st May 2013 by viljem_r in Gopro, Quadcopter, StartTags: air, aviation, camera, first flight, gopro, quadcopter, r/c, www youtube
Nothing special cause it is a first flight 🙂
Quadcopter part 2
Posted: 15th May 2013 by viljem_r in Quadcopter, StartTags: 2.0, calibrate, es, esc, ibrate, kk2, multirotor, multirotot, quadcopter, r/c
In part one I showed how to make quadcopter. But in part 2 I will explain a few things, because I spent a lot of time to search information on the internet. I am beginner, but I learn fast. I wanna help you with what I learned. 1. KK board is very good for beginners. […]
Quadcopter part 1
Posted: 15th May 2013 by viljem_r in Quadcopter, StartTags: 2.0, kk, mulitorotor, quadcopter, r/c, technology
OK parts arrived. It is gonna be long afternoon 🙂 First I assembled the frame. Best is if you do not screw bottom board until you wire quadcopter. Otherwise you would had to dismantle it later. Then you mount motors on the frame. Some use nylon straps, but I screw them on frame. Next you […]
Quadcopter- parts
Posted: 13th May 2013 by viljem_r in Quadcopter, Start, Technical stuffTags: hobby, kk, multirotor, propellers, quadcopter, r/c
Some parts finnally arrived. Just waiting for a few small things and then we are ready to fly. 🙂 frame commands and receiver kk 2.0 board motors and propellers
Quadcopter – configuration
Posted: 7th May 2013 by viljem_r in Quadcopter, Start, Technical stuffTags: adcopter, fpv, kk 2.0, quadcopter, r/c
I always loved rc planes, boats… I build them in a past. But that was always very expensive hobby for kid. So I grew up and earned some money and decided to make my own quadcopter. Budget was about 200 eur. That means a little better than start models of quadcopters. Also if you build […]