Posts Tagged ‘shop’

As you may heard bmw have a lot of problems with shaking brakes. You feel it when you brake at speeds around 100 kmh or less on your steering wheel. I replaced rotors and pads when they were worn, but I still had some shaking. There was no play when you grab and pushed a […]

I own bmw x3 e83 2007 for more than year now. It has 2.0d 110kw or 150KM engine in it. I bought it second hand with full service history and 130 000 km on tacho. I like the car. It drives great, it has very good 4 wheel drive. It can go anywhere in snow […]

Drill hanging station

Posted: 9th November 2016 by viljem_r in Garage, Start
Tags: , , , , , ,

This guy is a genious. Here is how can you organize your cordless drills.

Here is how I inspected BMW’s turbo wiht borescope.    

In bmw x3 stock sound system is crap. I already replaced all speakers and on an easter sunday I decided to install amp.  I already had it from previous car with all cables and other stuff I needed. There are several options where you wanna install it. I decided to install in it trunks floor. […]

Here is one video how you can adjust valves on Kadett C . Inlet valves are 0.15 mm and outlet valves are 0.25. So recommended is that the engine is warm. If you are playing with cold engine I recomment that you adjust valves on IN 0.20 and outlet on 0.30. When engine heats up, […]

Here is how you can do alu arm guard from alu sheet. I had 2mm thick sheet. It is very usefull when you are driving on snow or mud.   After I cut it with grinder, I shaped it with hamers. Use torch to heat up aluminium, it will be shaped easily.       […]

Stock lights on atv are not producing enought light at night. So if you are driving offroad at night you will need good extra light. One good alternative is Led bar. Installation is quite simple and light is very bright. You will need led bar, some wiring harness, relay 15 amps, fuse 10 amps, switch. […]

Here second part of my build: I made mounts for radio from aluminiun: Then testing how fascia fits in with radio. And finally time for fiberglass, I wraped frame with thick shirt. Then put some fiberglass on with brush.   After it dried I put another layer of  fiberglass mat. Time for car body filler, […]